Restoring Compressed Audio To Nearly Pre-Compressed Conditions For Playback (Restorer); Adjusting The Audio Delay Time While Watching The Picture; Delay); Adjusting The Picture Quality (Picture Adjust) - Denon AVR-2310CI Owner's Manual

Restoring Compressed Audio to Nearly Pre-compressed
Conditions for Playback (RESTORER)
• Such compressed audio formats as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the
amount of data by eliminating signal components that are hard for the human ear to hear. The RESTORER
function generates the signals eliminated upon compression, restoring the sound to conditions near
those of the original sound before compression. It also corrects the sense of volume of the bass to obtain
richer sound with compressed audio signals.
• This can be set with analog signals or when a PCM signal (fs = 44.1/48 kHz) is input.
Setting contents
OFF : Do not use RESTORER.
Mode1 (RESTORER 64) : Optimized mode for compressed sources with very weak highs.
Mode2 (RESTORER 96) : Apply suitable bass and treble boost for all compressed sources.
Mode3 (RESTORER HQ) : Optimized mode for compressed sources with normal highs.
• The default setting for "iPod" is "Mode3" . All others are set to "OFF" .
• W hen set to something other than "OFF" , "
• This can also be set by pressing during playback.
OFF
(RESTORER 64)
(RESTORER HQ)
Adjusting the Audio Delay Time while Watching the
Picture (Audio Delay)
Setting contents
0ms 200ms
~
• If you wish to adjust the "Audio Delay" while playing HDMI or component video signals, press
to set "GUI" to "OFF" . This way the audio delay can be adjusted while watching the picture. (Press
the u again. The display switches to the display of the menu screen only.)
• This cannot be adjusted when playing in the EXT. IN, DIRECT or STEREO mode (with "Front
Speaker" set to "Large" , "Tone Control" to "OFF" and "MultEQ" and "RESTORER" to "OFF").
• When the Auto Lipsync Correction function is operating, you can set within the range 0 ~ 100 ms.
• Store "Audio Delay" for each input source.
Remote control
operation buttons
Default settings are underlined.
" is displayed.
Mode 1 Mode 2
(RESTORER 96)
Mode 3
Default settings are underlined.
Displaying the menu
:
: Moves the cursor (Up/Down/Left/Right)
Cancel the menu
Adjusting the Sound and Picture Quality (Audio/Video Adjust)

Adjusting the Picture Quality (Picture Adjust)

• This can be set when the input source is DVD
With input sources other than the ones above, this can be set when "Video Select" is selected. In this
b
case, the original input source settings are called out.
• Can be set when the "Video Convert" setting (vpage 38) is "ON" .
Setting items
Contrast –6 ~ +6 (0)
Adjust picture contrast.
Brightness 0 ~ +12
Adjust picture brightness.
–6 ~ +6 (0)
Chroma Level
Adjust picture chroma level
(saturation).
Hue –6 ~ +6 (0)
Adjust color hue.
DNR OFF / Low / Middle / High
Reduce overall picture noise.
0 ~ +12
Enhancer
Emphasize picture contours.
• "DNR" and "Enhancer" are each effective with HDMI output.
• The value set at "Picture Adjust" is stored in the memory individually for each input source.
u
: Decision the setting
Default settings are underlined.
HDP TV SAT/CBL VCR DVR V.AUX .
Setting contents
: Return to previous menu
ENGLISH
2