Denon AVR-2310CI Owner's Manual page 44

ENGLISH
Setting Radio Reception Restrictions (Parental Lock)
Setting items
Lock Setting
This can be set when the source is set to SIRIUS .
Set the channel radio
1. Press
reception limits.
2. Using
3. Select channel by pressing
• Unlock : Do not lock selected channel(s).
• Lock : Lock selected channel(s).
b When a Parental Locked channel is tuned, "Code : [
then input the password.
• The default password is "0000" .
• If the password is wrong, "Incorrect Code" is displayed. Input the correct
password.
• While listening to the channel being played, you can also set parental lock
(vpage 45).
Edit Lock Code
This can be set when the source is set to SIRIUS .
Change the password.
1. Press
2. Input "Current Lock Code" (4 digits) using
3. Input "New Lock Code" (4 digits) using
4. Input "Repeat New Lock Code" (4 digits) again using
press
5. Press
If the correct password is input, "Completed" is displayed, and the new
password is modified.
• If the "Current Code" is incorrectly input, "Incorrect Code" is displayed,
and proceed again from step 1.
• If the password input is 3 digits or less, "Enter 4-digit" is displayed, and
input again with a 4 digit password.
• If the new password is not correctly input, "Code don't Match" is displayed
and the password does not change.
• The password cannot be cleared even if the operation to reset the unit is
performed. We recommend writing down the password so as not to forget
it.
Remote control

operation buttons
Default settings are underlined.
Setting contents
.
uio p , input the password (4 digits number) and press
ui
, and set the lock by pressing
.
uio p
uio p , and press
.
ui to select "Execute" , and then press
Displaying the menu
:
Cancel the menu
Check the SIRIUS Radio Reception Sensitivity
(Antenna Aiming)
Setting items
Antenna Aiming
Check the SIRIUS
.
reception sensitivity.
o p
.
]" is displayed,
, and press .
.
uio p , and
.
: Moves the cursor (Up/Down/Left/Right)
Making the input settings (Input Setup)
Setting contents
This can be set when the source is set to SIRIUS .
radio
Satellite : Indicate satellite signal strength.
Terrestrial : Indicate terrestrial signal strength.
SIRIUS Antenna
Display Condition
Signal strength is excellent
Signal strength is good
Signal strength is weak
No signal
: Decision the setting : Return to previous menu
Default settings are underlined.