Stereo Playback; Playing The Pure Direct Mode; Adjusting The Sound And Picture Quality (Audio/Video Adjust); Adjusting The Sound (Audio Adjust) - Denon AVR-2310CI Owner's Manual

Selecting the Surround Mode
r Stereo Playback
This is the mode for playing in stereo. The tone can be adjusted.
Sound is output from the front left and right speakers and
subwoofer.
1
Select the input source by pressing
and play the source (vpage
42).
2
Press to select the "STEREO".
t Playing the Pure Direct Mode
This is the mode that recreates the original sound most faithfully,
providing extremely high quality sound.
1
Select the input source by pressing
and play the source (vpage
42).
2
Press .
• To cancel, press again.
• The channel level and surround parameters in the PURE DIRECT
mode are the same as in the DIRECT mode.
NOTE
When in the PURE DIRECT mode, the GUI menu is not displayed
and the display on the main unit is turned off.
Remote control
operation buttons
Front
Rear
Front
Rear
Displaying the menu
:
: Moves the cursor (Up/Down/Left/Right)
Cancel the menu
Adjusting the Sound and Picture Quality
(Audio/Video Adjust)

Adjusting the Sound (Audio Adjust)

The sound being played in the surround mode can be adjusted to your liking.
The items (parameters) that can be adjusted depend on the signal being input and the currently set surround
mode. For details on the adjustable parameters, see "Surround Modes and Parameters" (vpage 62).
NOTE
Some of the setting items cannot be set while playback is stopped. Set these items during playback.
Setting items
Mode
n
In the PLgx, PLg or PLgz mode
Set the play mode for
Cinema : This is the mode for cinema source.
Music : This is the mode for music source.
playing 2-channel sources in
Game : This is the mode for game source.
surround.
ProLogic : Dolby Pro Logic playback mode (PLg mode only). (This is
the mode for 4-channel playback (front L, front R, center, surround
(MONO).)
n In the DTS NEO:6 mode
Cinema : This is the mode for cinema source.
Music : This is the mode for music source.
• The "Music" mode is also effective for movie sources including a
lot of stereo music.
• The "Cinema" and "Music" modes can also be set by pressing
or
Cinema EQ OFF : "Cinema EQ" is not used.
ON : "Cinema EQ" is used.
Soften the treble range of
movie sound tracks for better
understanding.
Dynamic Range Low/Mid/High : These set the compression level.
Compression (D.Comp) OFF : Turn dynamic range compression off.
Compress dynamic range
T he "D.Comp" indicator lights when playing DTS source that supports
(difference between loud
the "D.Comp" function.
and soft sounds).
Dynamic Range Control Auto : Dynamic range compression of Dolby TrueHD sources turns on and
(DRC) off automatically.
Compress dynamic range Low/Mid/High : These set the compression level.
OFF : Turn dynamic range compression off.
: Decision the setting
Default settings are underlined.
Setting contents
.
See overleaf
: Return to previous menu
ENGLISH