Denon AVR-2310CI Owner's Manual page 34

ENGLISH
Making the HDMI settings (HDMI Setup)
Make settings for HDMI video/audio output.
Setting items
Normal : Output with RGB video range (16 (black) to 235 (white)).
RGB Range
Set the video range of RGB Enhanced : Output with RGB video range (0 (black) to 255 (white)).
output from the HDMI
This setting is valid when using a TV equipped with a DVI terminal.
terminal.
Auto Lip Sync
ON : Compensated.
Automatic compensation
OFF : Not compensated.
for timing shift in audio and
video output.
HDMI Audio Out Amp : Use speakers connected to AVR-2310CI for audio playback.
Select HDMI audio output
TV : Use speakers of TV for audio playback.
device.
NOTE
When the HDMI control function is operating, the setting of audio playback
in the connected TV takes priority (vpage 54 "Controlling HDMI-
compatible devices from the AVR-2310CI (HDMI Control Function)").
HDMI Control
ON : Use the HDMI control function.
External devices can be
OFF : Do not use the HDMI control function.
controlled from the AVR-
• Please consult the operating instructions for each connected device
2310CI and the AVR-2310CI
to check the settings.
can be controlled from
• For details on the HDMI control function, see "Controlling HDMI-
external devices.
compatible devices from the AVR-2310CI (HDMI Control Function)"
(vpage 54).
NOTE
NOTE
The HDMI control
• When "Control" is set to "ON" , it consumes more standby power.
function controls
• When not using this unit for a long period, we recommend that you press
operations of a TV that
is compatible with the
• When the "HDMI Control" setting has been changed, always turn off the
HDMI control function.
power to the connecting devices afterwards and then turn back on.
Make sure that the TV
• The "HDMI Control" does not work when the power to the equipment is
and HDMI are connected
off.
when you perform HDMI
• When "HDMI Control" is set to "ON" , power is supplied constantly to the
control.
AC outlet (UNSWITCHED).
Remote control
3
operation buttons
Default settings are underlined.
Setting contents
to turn off (jOFF) the power.
Displaying the menu
:
Cancel the menu
Setting items
Standby Source
Set the HDMI connector for
HDMI signal input during
standby.
This can be set when
"HDMI Control" is set
to "ON" .
Power Off Control
The power of the AVR-2310CI
and external device turn off
together.
This can be set when
"HDMI Control" is set
to "ON" .
: Moves the cursor (Up/Down/Left/Right)
Making detailed settings (Manual Setup)
Setting contents
Last : Standby with last used input source during power on.
HDMI1 / HDMI2 / HDMI3 / HDMI4 / HDMI5 : The standby mode is set at
the input source assigned to the respective.
ON：Switched.
OFF：Not switched.
• Please consult the operating instructions for each connected device
to check the settings.
• For details on the HDMI control function, see "Controlling HDMI-
compatible devices from the AVR-2310CI (HDMI Control Function)"
(vpage 54).
: Decision the setting : Return to previous menu