Denon AVR-2310CI Owner's Manual page 52

ENGLISH
Setting items
LFE –10dB ~ 0dB
Adjust the low-frequency
For proper playback of the different program sources, we recommend
effects level (LFE).
setting to the values below.
• Dolby Digital sources :
• DTS movie sources :
• DTS music sources :
Center Image
0.0 1.0 (0.3)
~
Assign center channel signal
to front left and right channels
for wider sound.
Panorama ON : Set.
OFF : Do not set.
Assign front L/R signal also
to surround channels, for
wider sound.
Dimension
0 ~ 6 (3)
Shift sound image center
to front or rear, to adjust
playback balance.
Center Width 0 ~ 7 (3)
Assign center channel signal
to front left and right channels
for wider sound.
Delay Time 0ms ~ 300ms (30ms)
Adjust delay time to control
sound stage size.
Effect Level 1 ~ 15 (10)
Adjust the strength of the
Set to a lower level if the positioning and sense of phase of the
surround effect.
surround signals seems unnatural.
Room Size Small : Simulate acoustics of a small room.
Medium small : Simulate acoustics of a medium-small room.
Determine size of acoustic
Medium : Simulate acoustics of a medium room.
environment.
Medium large : Simulate acoustics of a medium-large room.
NOTE
Large : Simulate acoustics of a large room.
"Room Size" does not
indicate the size of the room
in which sources are played.
Remote control
9
operation buttons
Setting contents
"0dB"
"0dB"
"–10dB"
Displaying the menu
:
: Moves the cursor (Up/Down/Left/Right)
Cancel the menu
Adjusting the Sound and Picture Quality (Audio/Video Adjust)
Setting items
AFDM (Auto Flag Detect ON : Set.
Mode) OFF : Do not set.
Detects the source's surround
back channel signal and sets
the optimum surround mode
automatically.
Surround Back
n For 2-channel sources
Sets the method of
ON : The surround back channel is used.
generating of the surround OFF : No signal is played from the surround back channels.
back channel.
n For multi channel sources
Set this to set the method of generating of the surround back channel
for sources that do not include surround back signals and when you
do not want to play the surround back signals included in the source.
Check the audio signals of the source being played before making this
setting.
OFF : No signal is played from the surround back channels.
MTRX ON : Generate and play the surround back signals from the
surround channel signals.
PLgx CINEMA
decoding the signals in the "Dolby Pro Logic gx Cinema" mode.
PLgx MUSIC
decoding the signals in the "Dolby Pro Logic gx Music" mode.
ES MTRX : Generate and play the surround back signals from the
surround channel signals of the DTS source.
ES DSCRT
z
channel DTS source.
DSCRT ON z
channel source.
z 1 : This can be selected when "S.Back" in the "Speaker Config."
settings (vpage 29) is set to "2sp".
z 2 : This can be selected when "S.Back" in the "Speaker Config."
settings (vpage 29) is set to "2sp" or "1sp".
z 3 : When "AFDM" is set to "ON", the surround back channel is played
with the AFDM function. When selected while "AFDM" is set to
"OFF", the source's surround back signals are played.
This can also be set by pressing
NOTE
This is valid when the "Amp Assign" setting (vpage 28) is set to "7 .1-
channel surround back" or "6.1-channel surround back", and when the
"S.Back" setting (vpage 29) is set to "Large" or "Small".
: Decision the setting
Setting contents
1 : Generate and play the surround back signals by
z
2 : Generate and play the surround back signals by
z
3 : Play the surround back signals included in the 6.1-
3 : Play the surround back signals included in the 7 .1-
.
See overleaf
: Return to previous menu