Pre-Operation Inspection And Service - Alamo Industrial Lawn Mower Operator's Manual

Boom arm mower

Table of Contents

6.PRE-OPERATION INSPECTION AND SERVICE

Before each use, a pre-operation inspection and service of the implement and tractor must be performed.

This includes routine maintenance and scheduled lubrication, inspecting that all safety devices are equipped

and functional, and performing needed repairs. DO NOT operate the unit if the pre-operation inspection

reveals any condition affecting safe operation. Perform repairs and replacement of damaged and missing

parts as soon as noticed. By performing a thorough pre-operation inspection and service, valuable down time

and repair cost can be avoided. OPS-U-0029

Periodically inspect all moving parts for wear and replace when

necessary with authorized service parts. Look for loose fasteners, worn

or broken parts, and leaky or loose fittings. Make sure all pins have

cotter pins and washers. Serious injury may occur from not maintaining

this machine in good working order.

All Safety Shields, Guards and Safety devices including (but not

limited to) - the Deflectors, Chain Guards, Steel Guards, Gearbox

Shields, PTO integral shields, and Retractable Door Shields should

be used and maintained in good working condition.

devices should be inspected carefully at least daily for missing or

broken components.

replaced at once to reduce the possibility of injury or death from

thrown objects, entanglement, or blade contact.

AXTREME 2 02/10

OPERATION

(SG-21)

Missing, broken, or

worn items must be

Operation Section 3-9

All safety

(SGM-3)

Table of Contents

Axtreme 2