Shutting Down The Attached Head - For (Optional Equipment) - Alamo Industrial Lawn Mower Operator's Manual

Boom arm mower

Table of Contents

10.5 Shutting Down the Attached Head - For (Optional Equipment)

To shut down attached mower head, first bring the

tractor to a complete stop. Decrease engine RPM

to idle then disengage cutterhead. The mower head

will come to a complete stop within a suitable

amount of time. Do not engage or disengage the

cutterheads at a high RPM unless there is an

emergency situation.

Park the tractor on a level surface, place the

transmission in park or neutral and apply the

parking brake, shut down the engine, remove the

key, and wait for all motion to come to a complete

stop before exiting the tractor.

BEFORE leaving the tractor seat, always set the parking brake and/or set

the tractor transmission in parking gear, disengage the PTO, stop the

engine, remove the key, and wait for all moving parts to stop. Place the

tractor shift lever into a low range or parking gear to prevent the tractor

from rolling. Never dismount a Tractor that is moving or while the engine

is running. Operate the Tractor controls from the tractor seat only.

AXTREME 2 02/10

OPERATION

OPS-B- 0011_C

Operation Section 3-46

(SG-9)

Table of Contents

Axtreme 2