Table of Contents
Advertisement
SAW BLADE HEAD INSPECTION
•
Inspect the saw blades and spindle bolts for
looseness and excessive wear. Make sure the
unit is securely blocked up before doing
maintenance. Replace damaged and worn saw
blades as complete sets to maintain unit
balance.
•
Ensure hydraulic lines are properly connected
to the hydraulic motor. Check for hydraulic
leaks along hoses and fittings. DO NOT use
your hands to check for oil leaks. Use a piece
of heavy paper or cardboard to check for
hydraulic oil leaks.
•
Inspect the condition of the Micro V-belts.
•
Ensure the drive belt shields are in place and in
good repair. OPS-B- 0028
Do not put hands or feet near the cutter bar. Blade contact can result
in serious injury. Stay away until all motion has stopped and the
mower is securely blocked up.
AXTREME 2 02/10
© 2010 Alamo Group
OPERATION
(SBM-24)
Operation Section 3-16
Advertisement
Table of Contents
