Table of Contents
Advertisement
MAINTENANCE
Saw Blade Head
BLADES
For best performance, have blades set and sharpened when they begin to dull. Blades can be touched up with
a grinder or file between sharpenings.
To extend the life of the blade, remove resin accumulations. When the resin builds up, the blades will "burn" in
the cut, causing the blades to overheat and warp. When cutting some types of trees, blades will need to be
cleaned every few hours. To remove the resin, use oven cleaner or lacquer thinner with a Scotch-Brite pad or
steel wool. Apply these products carefully since many of them will remove paint from your Saw Blade Unit.
Always follow manufacturer's instructions for safe use.
Blades should turn clockwise when viewed from the top.
See illustration below for hose routing.
LUBRICATION
Grease each spindle with one pump of high quality lithium grease weekly. More than one pump is unnecessary
and will cause extra grease to spill from the relief.
Grease fittings are located in front of the machine, just above the blades.
AXTREME 2 02/10
Maintenance Section 4-10
©2010 Alamo Group
Advertisement
Table of Contents
