Table of Contents
Advertisement
MAINTENANCE
Hydraulic Oil, Filters, and Components
Filters and Oil - Change the Pressure Filter after the first 200 hours of operation. Change the filter again at 800
hours; then, change the oil and filters at 1600 hours. After that, continue to change the filter every 800 hours
and the oil every 1600 hours. Use hydraulic oil Chevron 1000 THF or equivalent.
Note: Your ambient temperature and operating conditions may require a different viscosity oil. Please consult
the oil manufacturer for proper specifications.
Keep all hoses and adapters tight. Repair any leaks immediately. Do not overtighten hose end fittings.
Tighten to specifications only. (See Chart Below)
Check the hydraulic oil level daily.
.
Sight Gauge
AXTREME 2 02/10
Maintenance Section 4-4
©2010 Alamo Group
Advertisement
Table of Contents
