Table of Contents
Advertisement
Software Version 1.1 Release & Errata Notes
MAIN MENU
SETUP
MODE ADJUST
INPUTS
AUDIO CONTROLS
SPEAKERS
SETUP
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
The DVD1 INPUT SETUP menu is used here as an example,
and will continue to be used as an example throughout this
document. The parameters on the left side of the on-screen
display are identical regardless of which input is selected. The
values on the right side are adjustable.
Likewise, whenever "DVD1" appears ºin a menu path, any
other input may be substituted.
RECORD IN
SETUP
INPUTS
DVD1
The RECORD IN parameter replaces the INPUT SELECT parameter
that was available on the RECORD ADV menu. (Other RECORD
ADV menu parameters are still available.) It can be used to select
the input source for the RECORD AUDIO OUTPUTS.
When set to ANLG . . .
•
The ANALOG IN connector specified in the INPUT SETUP menu
is sent to the RECORD AUDIO OUTPUTS.
•
The 5.1 analog input is not compatible with the RECORD
AUDIO OUTPUTS. Audio will not be available in the Record
Zone when the 5.1 analog input is selected for the Main Zone.
•
The RECORD AUDIO OUTPUTS are not available if a 5.1a
listening mode is selected in the Main Zone. However, audio
will be available in the Record Zone when the 5.1a BYPASS
listening mode is selected for the Main Zone.
6
INPUT SETUP
DVD1
DVD2
LD
TV
SAT
VCR
CD
PVR
GAME
TAPE
TUNER
AUX
(ANLG, DIGITAL, DMIX)
RECORD IN
DVD1 INPUT SETUP
Note:
NAME
DVD1
If the INPUT SELECT parameter on the
DIGITAL IN
COAX-1
ANALOG IN
NONE
RECORD ADV menu is set to AUTO in
ANLG IN LVL
AUTO
Software Version 1.0, the RECORD IN
VIDEO IN
S-VIDEO-1
parameter will be set to DMIX when
COMPONENT IN
1
2-CH
FILM
Software Version 1.1 is installed. In
D
5.1
FILM
Software Version 1.0, the INPUT SELECT
FILM
parameter defaults to the AUTO setting
5.1a
5.1a
FILM
for the LD, TV, SAT, PVR, GAME, and TAPE
MAIN ADVANCED
ZONE2 IN
inputs. If the default setting has not been
RECORD IN
changed, the RECORD IN parameter will
DIGITAL
automatically be set to DMIX for these
inputs when the new software is installed.
•
Analog input sources are sent to the analog-to-digital
converter, then the RECORD AUDIO OUTPUT labelled S/PDIF.
When set to DIGITAL . . .
•
The DIGITAL IN connector specified in the INPUT SETUP menu
is sent to the RECORD AUDIO OUTPUTS.
•
Only PCM digital input sources are compatible with the
RECORD AUDIO OUTPUTS.
•
Audio will not be available in the Record Zone when a Dolby
Digital, dts(-ES), or unknown digital input source is present.
When set to DMIX . . .
•
A 2-channel downmixed version of Main Zone audio is sent to
the RECORD AUDIO OUTPUTS. Downmixes can be generated
for Dolby Digital, dts(-ES), and 5.1 analog input sources. To
generate a downmix, the input that is selected in the Record
Zone must also be selected in the Main Zone (e.g. DVD1).
Lexicon
Advertisement
Table of Contents
