Table of Contents
Advertisement
MC-12/MC-12 Balanced
REVISED LISTENING MODE STATUS MENUS
then
SHIFT
S T A T
A second page has been added to the DOLBY D and dts(-ES)
STATUS menus to accommodate the addition of several new
parameters. STATUS menus can still be accessed with the remote
control. Press the SHIFT button, then the STAT button to access the
first page of the STATUS menu for the active listening mode. Press
the STAT button a second time to access the second page of the
menu. Press the STAT button a third time to exit the menu. (If the
STATUS menu does not include a second page, pressing the STAT
button a second time will exit the menu.)
The 5.1 BYPASS listening mode is now called the 5.1a BYPASS
listening mode. Likewise, the 5.1 BYPASS STATUS menu is now
called the 5.1a BYPASS STATUS menu. Level meters are no longer
available on the 5.1a BYPASS STATUS and 2CH BYPASS STATUS
menus.
An alphabetical glossary of listening mode parameters begins in
the next column and on page 5-20 of the MC-12 User Guide in the
next column. An alphabetical glossary of all listening mode
parameters begins on page 5-20 of the MC-12 User Guide (Rev 1).
Note:
Remote control MENU arrows can be used to scroll
listening mode STATUS menu parameters when the
MAIN command bank is active. STATUS menu
parameters are not adjustable.
Software Version 1.1 Release & Errata Notes
NEW LISTENING MODE PARAMETERS
This glossary contains additions and revisions to the listening mode
parameter descriptions that appear on page 5-20 of the MC-12
User Guide (Rev 1).
2.0 ENCODING
The 2.0 ENCODING parameter has been added to the
DOLBY D STATUS menu. When the parameter value is MATRIX,
matrix-encoding is present in the input signal. When the parameter
value is NONE, no matrix-encoding is present in the input signal.
BIT RATE
The BIT RATE parameter has been added to the DOLBY D and
dts(-ES) STATUS menus. It indicates the rate at which the input
signal is encoded. A higher bit rate indicates that less compression
was used during the encoding process.
CENTER MIX LVL
The CENTER MIX LVL parameter has been added to the DOLBY D
STATUS menu. It indicates the relative level of the center channel
that was used during the mixing process.
DIALOG OFFSET
The DIALOG OFFSET parameter has been added to the DOLBY D
STATUS menu. It indicates the dialog normalization value applied
to the input signal. Dolby Digital input sources reproduce dialog
at 31 decibels below full-scale (-31dBFS). When the dialog
normalization value of the incoming signal is higher or lower, the
DIALOG OFFSET parameter indicates the amount of adjustment
the unit makes to normalize dialog to -31dBFS.
. . . New Listening Mode Parameters continues on page 12
(MATRIX, NONE)
(32 to 3072kbps)
(-3.0dB, -4.5dB, -6.0dB)
(-31 to 0dB)
11
Advertisement
Table of Contents
