Lexicon MC-12 V1.1 - RELEASE NOTES REV 1 Release Note page 15

MC-12/MC-12 Balanced
21. The 5.1 MONO, 5.1 MONO LOGIC, and 5.1 MONO SURR
listening modes are designed for playback of Dolby Digital
mono input sources. When a Dolby Digital 1.0 input source is
present, the unit will automatically select the 5.1 MONO
LOGIC listening mode. The unit will not automatically select
5.1 MONO LOGIC for other Dolby Digital mono input sources.
22. The rear panel TRIGGER OUTPUTS will be deactivated when
the unit is placed into standby. However, when the TRIGGER
parameters on the TRIGGER SETUP menu are set to REMOTE
ONLY, the corresponding TRIGGER OUTPUT will not be
activated when the unit is powered on. Instead, this TRIGGER
OUTPUT must be activated using the remote control
commands described on page 2-12 of the MC-12 User Guide
(Rev 1).
23. The Mute button LED lights whenever mute is activated, either
automatically or manually. For example, the unit will briefly
activate mute when switching input sources or listening
modes.
24. When the preferred listening mode selection parameters on
the INPUT SETUP menu are set to USE LAST, the unit will revert
to the previously-selected listening mode when the current
input is deselected, then reselected. However, when the
2-CHANNEL listening mode is selected with the 2CH button on
the remote control, the unit will revert to the listening mode
that was selected prior to the 2-CHANNEL listening mode.
Software Version 1.1 Release & Errata Notes
15