A 2-Channel - Lexicon MC-12 V1.1 - RELEASE NOTES REV 1 Release Note

Software Version 1.1 Release & Errata Notes
5.1a STANDARD
MODE ADJUST 5.1a STANDARD
• Designed for playback of 5.1 analog sources.
• Converts the 5.1 analog input into digital audio for
internal processing. This allows the 5.1 analog input to utilize
bass management, audio controls, crossovers, and speaker
distance calibration. When these features are not utilized, this
listening mode is similar to the 5.1a BYPASS listening mode.
• Sends identical signals (with appropriate time delay) to the
SIDE L and REAR L outputs, as well as the SIDE R and REAR R
outputs.
Default
Parameter Value
OUTPUT LEVELS See page 5-17 for more information*
CUSTOM See page 5-17 for more information*
* Refers to the MC-12 User Guide (Rev 1).
An alphabetical glossary of listening mode parameters begins on
page 11 of this document and on page 5-20 of the MC-12 User Guide
(Rev 1).
10
Values

5.1a 2-CHANNEL

MODE ADJUST 5.1a 2-CHANNEL
• Designed for recording 5.1 analog sources to stereo recording
devices.
• Converts the 5.1 analog input into digital audio, using a
LOGIC7-encoding process to downmix it to two channels. This
is recommended for recording from a DVD-A or multi-channel
SACD player to a CD-R.
Default
Parameter Value
CENTER MIX +0dB
SURROUND MIX +0dB
CNTR DLY SAMPLES +0
MASTER LEVEL +0dB
LFE MIX +0.0dB
SUB L/R LVL +0dB
CUSTOM See page 5-17 for more information*
* Refers to the MC-12 User Guide (Rev 1).
An alphabetical glossary of listening mode parameters begins on
page 11 of this document and on page 5-20 of the MC-12 User Guide
(Rev 1).
Lexicon
Values
-25 to +5dB
-5 to +5dB
-127 to +127
-5 to +5dB
-10.0 to +0.0dB
OFF, -30 to +12dB