Icr And Ir - D-Link DCS-6510 User Manual

Configuration
You may configure the ICR and IR settings here. An IR(Infrared) Cut-Removable(ICR) filter can be disengaged for increased sensitivity
in low light environments.
Automatic:
Day Mode:
Night Mode:
Schedule Mode:
IR Light Control:
Sync:
Schedule
D-Link DCS-6510 User Manual
The Day/Night mode is set automatically.
Generally, the camera uses Day mode and
switches to Night mode when needed.
Day mode enables the IR Cut Filter.
Night mode disables the IR Cut Filter.
Set up the Day/Night mode using a schedule.
The camera will enter Day mode at the starting
time and return to Night mode at the ending
time.
The camera can enable or disable the IR
(infrared) light according to your preferences.
This setting provides additional controls
depending on your specific application.
Off:
The IR light will always be off.
On:
The IR light will always be on.
The IR light will turn on when the ICR sensor is on.
The IR light will turn on or off according to the schedule that you specify below.

ICR and IR

51