Surface Mount (Dcs-33-2) - D-Link DCS-6510 User Manual

User manual

Hide thumbs Also See for DCS-6510:

Table of Contents

Installation

1. Locate a suitable position on the ceiling for a 45 mm (+2 / –0 mm) hole to be cut

(optional). A template is included to aid in marking the mounting hole.

Note: If you will not drill a hole for the cable, please see page 8 for information

regarding how to change the orientation of the cable.

2. Cut the hole in the ceiling according to the template

3. Drill 3 separate 6 mm holes corresponding to the holes in the mounting template and

insert the plastic anchors into these holes.

4. Attach the surface bracket to the ceiling using the screws provided.

5. Slip the cosmetic plastic ring over the bracket and turn it clockwise to lock it into place.

D-Link DCS-6510 User Manual

Surface Mount (DCS-33-2)

Ceiling

Surface

Bracket

Plastic

Ring

Dome

Camera

Table of Contents