Table of Contents
Advertisement
Installation
7. Attach one side of the safety tether cable to the inner mounting ring using the small
screw. Attach the opposite side of the tether to the base of the camera using the other
small screw.
8. Connect the Ethernet cable and the power cable, threading them through the hole in
the ceiling.
9. Push the dome body up into the installed bracket taking care to align the mounting
bolts on the camera base with the bracket's slots. Rotate the camera clockwise to lock
the camera into the bracket.
D-Link DCS-6510 User Manual
Tether
12
Advertisement
Table of Contents
