Motion Detection - D-Link DCS-6510 User Manual

Configuration
Enabling Video Motion will allow your camera to use the motion detection feature. You may draw a finite motion area that will be used
for monitoring.
Enable Video Motion:
Sensitivity:
Percentage:
Draw Motion Area:
Erase Motion Area:
D-Link DCS-6510 User Manual

Motion Detection

Select this box to enable the motion detection
feature of your camera.
Specifies the measurable difference between two
sequential images that would indicate motion.
Please enter a value between 0 and 100.
Specifies the amount of motion in the window
being monitored that is required to initiate an
alert. If this is set to 100%, motion is detected
within the whole window will trigger a snapshot.
Draw the motion detection area by dragging your
mouse in the window (indicated by the red square).
To erase a motion detection area, simply click on the red square that you wish to remove.
Right clicking on the camera image brings up the following menu options:
Select All: Draws a motion detection area over the
entire screen.
Clear All: Clears any motion detection areas that
have been drawn.
Restore: Restores the previously specified motion
detection areas.
39