Table of Contents
Advertisement
Configuration
Enable PPPoE:
Enable this setting if your network uses PPPoE.
User Name:
The unique name of your account. You may
obtain this information from your ISP.
Password:
The password to your account. You may obtain
this information from your ISP.
HTTP Port:
The default port number is 80.
Access Name for Stream 1~3:
The default name is video#.mjpg, where # is the
number of the stream.
HTTPS Port:
You may use a PC with a secure browser to
connect to the HTTPS port of the camera. The
default port number is 443.
RTSP Port:
The port number that you use for RTSP streaming
to mobile devices, such as mobile phones or
PDAs. The default port number is 554. You may
specify the address of a particular stream. For
instance, live1.sdp can be accessed at
rtsp://x.x.x.x/video1.sdp where the x.x.x.x
represents the ip address of your camera.
Maximum Upload/Download
Specifying the maximum download/upload
Bandwidth:
bandwidth for each socket can be useful when
connecting your device to a busy or heavily
loaded network. Entering a value of '0' indicates
that the camera should not monitor bandwidth.
Specifying other values will limit the camera's
transfer speed to the specified number of
Kilobytes per second.
D-Link DCS-6510 User Manual
35
Advertisement
Table of Contents
