Table of Contents
Advertisement
Installation
Adjusting the Zoom/Focus
Adjust the Viewing Angle of the 3-Axis Mechanism
Turn the lens module left and right until the desired position is achieved; tighten the pan
screw once completed.
Loosen the tilt screws on both sides of the camera, and turn the lens module up and
down until the desired position is achieved; tighten the tilt screws once completed.
Turn the lens to adjust the IP camera's image until the desired orientation is achieved,
tighten the image adjustment screw once completed.
Adjust Zoom and Focus of the Lens Module
Please use the included plastic lens tool to make these adjustments.
Adjust the zoom factor by moving the controller left and right until the desired range is
achieved. Tighten the zoom controller once completed.
Adjust the focus range by moving the controller left and right until the image is clear.
Tighten the focus controller once completed.
D-Link DCS-6510 User Manual
10
Advertisement
Table of Contents
