Table of Contents
Advertisement
Quick Links
Original
Original
Original
Original
Original
Operating
Operating
Operating
Operating
Operating
Instructions
Instructions
Instructions
Instructions
Instructions
Multi-Purpose Machine
Multi-Purpose Machine
Multi-Purpose Machine
Multi-Purpose Machine
Multi-Purpose Machine
400E and 400K
400E and 400K
400E and 400K
400E and 400K
400E and 400K
Briggs&Stratton engine
3348, 5117, 3346
Before commissioning the machine, read operating
instructions and observe warnings and safety instructions.
Operating Instructions No. 998 702-C 01.10
Advertisement
Table of Contents
Related Manuals for Agria 400K
Summarization of Contents
Symbols and Name Plate
Operator Symbols
Explains various warning and informational symbols used in the manual.
Name Plate Details
Lists required information for the machine's name plate.
Designation of Parts - Type 400E
Machine Components (Figure A)
Identifies key components of the 400E machine via diagram A.
Engine Components (Figure B)
Details engine parts shown in diagram B.
Parts Description - Type 400E
Figure A Parts List
Lists and describes components identified in Figure A.
Figure B Parts List
Lists and describes components identified in Figure B.
Designation of Parts - Type 400K
Machine Components (Figure C)
Identifies key components of the 400K machine via diagram C.
Engine Components (Figure D)
Details engine parts shown in diagram D.
Parts Description - Type 400K
Figure C Parts List
Lists and describes components identified in Figure C.
Figure D Parts List
Lists and describes components identified in Figure D.
Unpacking and Assembly
Assembly Steps
Outlines the steps for assembling the machine after unpacking.
Battery Installation (400K)
Details the process for installing the battery on the 400K model.
Recommendations for Use and Maintenance
Lubricants and Anti-Corrosive Agents
Specifies recommended lubricants and anti-corrosive agents for the machine.
Fuel and Maintenance Advice
Provides guidelines on fuel use and maintenance recommendations.
Safety Instructions
General Safety and Accident Prevention
Covers fundamental safety rules and accident prevention measures.
Proper and Improper Use (Due Use)
Defines intended uses and warns against misuse of the machine.
Safety Precautions During Operation
Working Area and Dangerous Zones
Advises on safe practices regarding the working area and hazardous zones.
Starting the Engine Safely
Details the procedures for safely starting the engine.
Operational Safety and Attachment Handling
Safe Operation on Slopes
Provides guidance for safe operation on inclined surfaces.
End of Operation and Attachment Safety
Outlines end-of-operation steps and attachment safety measures.
Maintenance and Storage Safety
Safety During Maintenance
Emphasizes safety precautions to be taken during maintenance activities.
Safe Storage Guidelines
Provides instructions for safe storage of the machine.
Tyre, Electrical System, and Safety Signs
Tyre and Electrical System Safety
Covers safety considerations for tyres, electrical systems, and batteries.
Explanation of Warning Signs
Explains the meaning of various warning signs found on the machine.
Specifications - Type 400E
Machine Dimensions and General Specs
Lists physical dimensions, clutch, gearbox, weight, and noise levels.
Speed and Tyre Specifications
Details ground speeds, tyre types, and pressures.
Engine Specifications - Type 400E
Briggs & Stratton Engine Details
Provides specific technical data for the Briggs & Stratton 5 HP engine.
Power Built Engine Details
Details technical specifications for the Power Built 190 engine.
Specifications - Type 400K
Machine Dimensions and General Specs
Lists physical dimensions, clutch, gearbox, weight, and noise levels for the 400K model.
Speed and Tyre Specifications
Details ground speeds, tyre types, and pressures for the 400K model.
Engine Specifications - Type 400K
Briggs & Stratton Engine Details (400K)
Provides technical data for the Briggs & Stratton engine used in the 400K.
Machine Overview and Engine Systems
Machine Description and Applications
Describes the multi-purpose machine and its applications.
Engine Systems Overview
Details engine operation, cooling, idling, air filter, and ignition systems.
Controls and Safety Features
Speed Control and Engine Shut-off
Explains the speed control lever and engine shut-off switch functionality.
Safety Circuit Operation
Describes the function and operation of the machine's safety circuit.
Operating Controls: Choke, Fuel Tap, Clutch
Choke and Fuel Tap Operation
Details how to use the choke and fuel tap controls.
Clutch Mechanism and Adjustment
Explains the clutch operation and factory-set play.
Drive System: Forward, Reverse, and Speeds
Travelling Drive: Forward/Reverse
Details the operation of the forward and reverse drive system.
Changing Speeds (V-belt)
Explains how to adjust the machine's speeds by moving the V-belt.
Recommended Speeds by Attachment Type
Type 400E Speed Recommendations
Provides recommended speeds for various attachments on the Type 400E.
Type 400K Speed Recommendations
Provides recommended speeds for various attachments on the Type 400K.
Wheel Drive Engagement
Engaging and Disengaging Wheel Drive
Details the procedure for operating the wheel drive engagement lever.
Drive-Wheel Mounting
Mounting Drive-Wheels
Step-by-step guide on how to mount the drive-wheels onto the machine.
Drive-Wheel Engagement Options
Rigid, Neutral, and Differential Drive
Explains the three engagement modes for the drive-wheels.
Wheels and Anti-Wind-On Pipes
Anti-Wind-On Pipe Installation
Instructions for fitting anti-wind-on pipes to the mowing attachment.
Twin and Cage Drive-Wheels
Details mounting procedures for twin and cage drive-wheels.
Fitting and Removing 4.00-8 Drive-Wheels
Fitting 4.00-8 Field Tyres
Guide to fitting standard 4.00-8 field tyres.
Fitting 4.00-8 Tyres with Differential Hubs
Instructions for fitting 4.00-8 tyres with differential hubs.
Differential Hubs and Wheel Weights
Differential Hub Adjustment
Details how to fit differential hubs rigidly and lubrication.
Fitting Wheel Weights
Instructions for installing wheel weights onto the hubs.
PTO Drive and Machine Stand
PTO Engagement and Disengagement
Explains how to switch the PTO drive on and off for both models.
Using the Machine Stand (400K)
Describes the function and operation of the stand on the 400K model.
Steering Handle Adjustment
Height Adjustment for Steering Handle
Details how to adjust the height of the steering handle for both models.
Side Adjustment for Steering Handle
Explains how to adjust the steering handle's side position.
Battery Safety - Type 400K
Battery Charging and Handling Precautions
Covers charging, handling, and safety warnings for the 400K battery.
Attachment Coupling Procedures
General Attachment Safety
Emphasizes safety when coupling and decoupling attachments.
Coupling Front Attachments
Details the steps for coupling front attachments to the machine.
Connecting and Disconnecting Attachments
Hooking Up Front Attachments
Explains how to connect the machine to front attachments.
Decoupling Attachments Safely
Describes the procedure for safely disconnecting attachments.
Rear Attachments and Hitching
Connecting Rear Attachments
Details how to connect rear attachments using pins and tubes.
Hitching Device Functionality
Explains the optional hitching device and its adjustment features.
Front Weight Installation
Fitting the Front Weight Support
Instructions for mounting the front weight support to the machine.
Installing the Front Weight
Details the process of attaching the weight to the support.
Hoe Blades Installation
Hoeing Width and Blade Sets
Describes standard and add-on blade sets for different hoeing widths.
Fitting Blade Sets and Guard Discs
Step-by-step guide for installing hoe blades and guard discs.
Depth Bar Adjustment and Function
Depth Bar Types and Fitting
Explains the two depth bar versions and how to fit them.
Setting Cultivating Depth
Details how to adjust the depth bar for optimal soil cultivation.
Ridging Unit and Strake Wheels
Ridging Unit Assembly
Instructions for assembling the ridging unit and fitting guard discs.
Using Strake Wheels for Ridging
Explains how to use strake wheels for ridging operations.
Commissioning and Pre-Operation Checks
Machine Commissioning and Break-in
Guidelines for initial commissioning and engine break-in period.
Checking Oil and Fuel Levels
Procedures for checking engine oil and fuel levels before operation.
Starting the Engine
Pre-Start Checks
Lists essential checks before starting the engine.
Engine Starting Procedure
Step-by-step guide for starting the engine, including electric start.
Shutting Off the Engine
Engine Shutdown Procedure (5 HP)
Details how to shut down the 5 HP engine model.
Engine Shutdown Procedure (Power Built)
Explains how to shut down the Power Built engine model.
Operation and Safety Zones
Safe Operation Guidelines
Covers general operation, coupling attachments, and safety gear.
End of Operation and Danger Zones
Procedures for ending operation and identifying danger zones.
Maintenance - Type 400E Engine
Checking Engine Oil Level (400E)
Instructions for checking and refilling engine oil on the 400E.
Changing Engine Oil (400E)
Details the procedure for changing engine oil on the 400E.
Maintenance - Type 400K Engine
Checking Engine Oil Level (400K)
Instructions for checking and refilling engine oil on the 400K.
Changing Engine Oil (400K)
Details the procedure for changing engine oil on the 400K.
Air Filter and Fuel System Maintenance
Air Filter Maintenance
Covers cleaning and replacing the air filter for both engine types.
Fuel System Checks
Advises on checking fuel hoses, tank, and carburetor for leaks.
Spark Plug, Cooling, Governor, and Exhaust
Spark Plug Maintenance
Details cleaning, adjusting, and replacing the spark plug.
Cooling System and Governor Care
Instructions for cleaning the cooling screen and maintaining the governor.
Engine Component Maintenance and Settings
Carbon Deposit Removal and Head Screws
Procedures for removing carbon deposits and tightening cylinder head screws.
Speed Control and Carburetor Settings
Guidance on adjusting speed controls and carburetor settings.
Machine and Drive-Wheel Maintenance
Worm Gear Oil Level and Exchange
Details checking and changing transmission oil for the worm gear.
Drive-Wheel Maintenance
Covers tyre pressure checks and wheel-shaft lubrication.
Safety Circuit and Control Adjustments
Safety Circuit Function Check
How to verify the safety circuit is working correctly.
Clutch and Wheel Drive Lever Adjustments
Procedures for adjusting the play in clutch and wheel drive levers.
V-Belt Tension Adjustment
V-Belt Adjustment Procedure
Step-by-step guide to adjusting the V-belt tension for proper operation.
General Maintenance and Cleaning
General Checks and Lubrication
Routine checks for leaks, bolts, and lubrication of moving parts.
Cleaning the Machine and Engine
Instructions for cleaning the machine and engine safely.
Storage Procedures
Preparing Machine for Storage
Steps for cleaning and preserving the machine for storage.
Engine Preservation for Storage
Details draining fuel, changing oil, and setting piston for storage.
Troubleshooting Engine Issues
Engine Not Starting or Misfiring
Diagnoses and solutions for engine start failures and misfirings.
Engine Overheating and Stalling
Addresses causes and remedies for engine overheating and stalling.
Troubleshooting Drive and Vibration Issues
Low Engine Output and Drive Problems
Solutions for low engine power and drive system issues.
Excessive Vibration Diagnosis
Identifies causes and solutions for excessive vibration.
Electrical Wiring and Lubrication
Electrical Wiring Diagram
Shows the electrical connections for the machine's components.
Lubrication Chart
Illustrates key lubrication points on the machine.
Spare Parts and Wear Components
Wear Parts and Consumables
Lists wear parts like air filters, spark plugs, and V-belts.
Varnishes and Fuel Stabilizer
Details available varnishes and fuel stabilizer product information.
Parts Designation - Figure E (Type 400E)
Steering Handle and Controls Components
Lists parts related to the steering handle and control levers.
Component Diagrams - Type 400E
Figure E: Steering and Control Assembly
Diagram showing steering handle and control lever assemblies.
Figure F: Drive Belt System
Diagram illustrating the V-belt drive system components.
Inspection and Maintenance Schedule
Maintenance Tasks by Operating Hours
Chart detailing maintenance tasks based on operating hours and frequency.
Maintenance Responsibility Matrix
Indicates whether tasks are for operator, workshop, or professional execution.
Parts Designation - Figure G (Type 400K)
Steering Handle and Control Components (400K)
Lists parts for steering handle and controls on the 400K.
Component Diagrams - Type 400K
Figure G: Steering and Control Assembly (400K)
Diagram showing steering handle and control lever assemblies for 400K.
Figure H: Drive Belt System (400K)
Diagram illustrating the V-belt drive system components for 400K.
EC Declaration of Conformity
Manufacturer's Declaration of Conformity
Official declaration that the machine complies with EC directives.
Manufacturer Contact Information
agria-Werke GmbH Details
Provides contact address, phone, fax, and email for the manufacturer.
Need help?
Do you have a question about the 400K and is the answer not in the manual?
Questions and answers