Nokia NBB5005000 - IP VPN 5i Installation Manual: Connecting Power And Turning The Power On

Installation guide.
Hide thumbs
Table 4 Pin Assignments for DB9 and DB25 Interface Cables
Console or serial
pin and assignment
Shield (FG)
2 (RXD)
3 (TXD)
4 (DTR)
5 (SG)
6 (DSR)
7 (RTS)
8 (CTS)

Connecting Power and Turning the Power On

The power switch and receptacle for the power cord are located on the back of
the gateway, as shown in
The gateway power supplies automatically detects the input voltage (120
VAC [100 to 130] or 240 VAC [200 to 264]) and configures itself
appropriately.
Note
The Nokia 5i and Nokia 10i automatically powers on when the power
cable is connected.
Nokia 5i and 10i Installation Guide
Performing the Initial Hardware Configuration
DB9 cable-output pin and
assignment
Shield (FG)
3 (TXD)
2 (RXD)
6 (DSR)
5 (SG)
4 (DTR)
8 (CTS)
7 (RTS)
Figure
3.
DB25 cable-output pin and
assignment
1 (FG)
2 (TXD)
3 (RXD)
6 (DSR)
7 (SG)
20 (DTR)
5 (CTS)
4 (RTS)
29

   Related Manuals for Nokia NBB5005000 - IP VPN 5i

This manual also for:

5i, 10i

Comments to this Manuals

Symbols: 0
Latest comments: