Table of Contents
Advertisement
2
Installing a Nokia 5i and 10i Gateway
Table 3
Nokia 10i.
Table 3 Rear Panel connection descriptions of the Nokia 5i and Nokia 10i
Label
Console
3
2
1
Auxiliary
Power
Resetting the Gateway to Factory Default
A reset button is located on the rear panel and is used to reboot and reset the
Nokia 5i and 10i gateways.
Caution
he following action results in the loss of all security services and
T
passwords.
24
describes the connections on the rear panel of the Nokia 5i and
Description
The console port is a 9-pin male connector that can be connected
to the serial (COM) port of the computer or network device. You
can then use the command-line interface (CLI) through a serial
program such as HyperTerminal to communicate with the device.
Ethernet port (RJ-45) used for connecting computers or other
network devices.
Ethernet port (RJ-45) used for connecting computers or other
network devices.
Ethernet port (RJ-45) used for connecting computers or other
network devices.
The auxiliary port (AUX) or dial-in port is a 9-pin male connector.
This port is used to dial in to the Nokia 5i and Nokia 10i through a
modem when the Nokia 5i or Nokia 10i is unreachable through
other ports.
A power jack for supplying power to the device. Connect the
power adapter to this jack.
Nokia 5i and 10i Installation Guide
Advertisement
Table of Contents
