Figure 3 Power Cord Receptacle On The Nokia 5I And Nokia 10I - Nokia NBB5005000 - IP VPN 5i Installation Manual

Installation guide
Table of Contents

Advertisement

2
Installing a Nokia 5i and 10i Gateway

Figure 3 Power Cord Receptacle on the Nokia 5i and Nokia 10i

To connect the power
1. Connect the power cord securely into the power cord receptacle on the
back of the gateway.
2. Plug the other end of the cord into a three-wire grounded power strip or
wall outlet.
If the gateway does not power up, contact your Nokia service provider as
listed in
30
Console
3
"Nokia Contact Information"
2
1
Auxiliary
on page 3 for technical support.
Nokia 5i and 10i Installation Guide
Power
00409.1

Advertisement

Table of Contents
loading

This manual is also suitable for:

5i10i

Table of Contents