HP P4522A - Traffic Management Server Sa8220 Getting Started Manual page 9

Configuration
Checklists
Setting
Hostname assigned to the SA8220's network side
interface
IP address(es) assigned to the SA8220's NIC
card(s), and associated subnet mask(s)
Default gateway for traffic from the SA8220 to the
network
The intended failover method
Network side online IP address to be shared by
the two SA8220s, if you use serial cable failover
This section contains two configuration tables, the Quick Site
Configuration and the Detailed Site Configuration. One of these
must be filled out before continuing. We recommend using the
Detailed Site Configuration table on the next page. Its use is
mandatory when installing more than one SA8220. However, if you
are in a hurry and need to get a single SA8220 up and running
quickly, use the Quick Site Configuration below.
We recommend that you photocopy the Quick or Detailed Site
Configuration table, as appropriate. Fill out the copy before
proceeding, and keep it handy while you perform the installation
procedures.
Quick Site Configuration
For further information regarding the choices in these configuration
tables, see Chapter 2 in the User Guide.
Configuring Your Terminal
Choice
o NONE o ROUTE o SERIAL
7