HP P4522A - Traffic Management Server Sa8220 Getting Started Manual page 12

HP Traffic Director Server Appliances Getting Started Guide
NOTE: For more
information on DNS, see
"Configuring DNS" later
in this chapter.
10
2. If using DNS, type your information as indicated at the prompts.
For example:
monitor>dns
Would you like to configure DNS (yes,no)?
[no] --->yes
Enter Domain name('-' to cancel)
--->crisc.com
Enter the IP Address of the Primary name
server ('-' to cancel) -->10.6.3.5
Specify additional name server (<return> to
end) ---> 10.6.3.10
3. Save the configuration file by typing your information as
indicated at the prompts. For example:
monitor>save
List of currently saved configuration file(s).
You may save over an existing configuration
file or enter a new name.
<configuration files are listed here>
'active.cfg' is the last booted configuration.
Enter configuration file name (- to cancel):
[active.cfg] --->-
Configuration save canceled!
4. Reboot the system. For example:
monitor>boot
<system information is displayed here>
Select a boot configuration from the following
files
<configuration files are listed here>
Boot configuration file name? [active.cfg]
--->
Do you really want to boot 'active.cfg'?
[y] --->
Please stand by, the system is being booted.
..... Done
5. Type your new root password at the prompts. For example:
New root password (8 to 128 significant
characters) --->password
Retype new password --->password