HP P4522A - Traffic Management Server Sa8220 Getting Started Manual page 15

• Names of any servers included in the configuration, if entered as
names as opposed to addresses
• Names of any clients from which administration via the CLI or
the GUI will be performed
• Names of any TFTP servers that will be used to send or retrieve
configuration files
Adding and Deleting Host Entries
The CLI command, config sys hosts info lists the contents
of the hosts file.
1. To add a host, type this command:
HP SA8220/config/sys/hosts#add <IP address>
'alias' <hostname> {'alias1' <hostname>
{'alias2' <hostname> {'alias3' <hostname>
{'alias4' <hostname> {'alias5' <hostname>
{'alias6' <hostname> }}}}}}
For example:
HP SA8220/config/sys/hosts#add 10.5.5.13
alias server13 alias2 http-serv13
Host ip '10.5.5.13' added to host file.
The SA8220 is now able to access other devices on the network
by name, either through the local static name table or through
DNS.
2. To delete a host, type this command:
HP SA8220/config/sys/hosts#delete <IP
address>
For more information on these commands, see Chapter 5 in the User
Guide.
Configuring DNS
13