HP P4522A - Traffic Management Server Sa8220 Getting Started Manual page 6

HP Traffic Director Server Appliances Getting Started Guide
Side Rail
Installation
NOTE: The small
mounting brackets have
recesses that allow them
to fit over the front end of
the side rail.
4
Side rail mounting of the SA8220 requires the use of the enclosed
small mounting brackets and four of the Phillips head screws.
1. Locate the two small mounting brackets and the provided screws.
2. Attach a side rail to each SA8220 using the rows of five screw
holes on the side of the SA8220, equidistant from the top and
bottom, as shown below. The screws for this procedure are not
provided with the SA8220; they are supplied with your side rail
hardware.
SA8220 bracket
holes
side-view
Side Rail Mounting of the SA8220
3. Attach a small mounting bracket to each side of the SA8220,
using two of the provided screws for each bracket. Use the holes
nearest to the front of the SA8220.
4. Slide the SA8220 into the cabinet's receiving rails and secure the
front flange of each mounting bracket with two screws.
Mounting bracket side-view
(connect to SA8220)
Rail mount holes
end-view