Cisco MS200X-24 Quick Start Manual

Cisco MS200X-24 Quick Start Manual

Ms200x series 24-port 10/100 ethernet access switches

Advertisement

Cisco MS200X Series 24-Port 10/100 Ethernet
Access Switches
Package Contents
• MS200X-24, MS200X-24S, or MS200X-24P 10/100 Ethernet
Access Switch
• Power Cord
• Rackmount Kit and Rubber Feet
• Console Cable

• Quick Start Guide

• Product Warranty
• Pointer Card with China RoHS
Quick Start Guide

Advertisement

Table of Contents
loading

Summary of Contents for Cisco MS200X-24

  • Page 1: Quick Start Guide

    Quick Start Guide Cisco MS200X Series 24-Port 10/100 Ethernet Access Switches Package Contents • MS200X-24, MS200X-24S, or MS200X-24P 10/100 Ethernet Access Switch • Power Cord • Rackmount Kit and Rubber Feet • Console Cable • Quick Start Guide • Product Warranty...
  • Page 2: Before You Begin

    Welcome Thank you for choosing the Cisco MS200X Series 24-Port 10/100 Ethernet Access Switch. This guide describes how to physically install your MS200X switch and how to use the web-based interface and the console port to access and manage the switch. For additional information, see www.cisco.com/go/cn/ms200x.
  • Page 3: Front Panel

    Ports connection points for miniGBIC modules, so the switch can uplink to other switches by using fiber-optic cable. • The miniGBIC ports are compatible with Cisco miniGBIC modules MFEBX1, MFEFX1, MFELX1, MGBBX1, MGBLH1, MGBLX1, and MGBSX1. • The miniGBIC port is a combination port, shared with one other RJ-45 port.
  • Page 4: Back Panel

    The fuse is in the neutral (N). ARNING Default Settings These are the default settings used when configuring your MS200X switch for the first time. Parameter Default Value Username cisco Password cisco Switch IP 192.168.1.254 Cisco MS200X Series 10/100 24-Port Ethernet Access Switches...
  • Page 5: Mounting The Ms200X

    Placement Tips • Ambient Temperature—To prevent the switch from overheating, do not operate the MS200X-24 switch in an area that exceeds an ambient temperature of 104°F (40°C), and do not operate the MS200X-24S or MS200X-24P switch in an area that exceeds an ambient temperature of 122°F (50°C).
  • Page 6: Wall Mounting

    Insecure mounting might damage the switch or cause injury. ARNING Cisco is not responsible for damages incurred by insecure wall-mounting. To mount the switch to the wall: Determine where you want to mount the switch. Verify that the surface is smooth, flat, dry, and sturdy.
  • Page 7: Connecting Network Devices

    Cisco strongly recommends using CAT-5E or better cable to connect network devices. When you connect your network devices, do not exceed the maximum cabling distance of 100 meters (328 feet). It can take up to one minute for attached devices or the LAN to be operational after it is connected.
  • Page 8: Configuring The Ms200X Switch

    “IP Addressing”. Open a Web browser window. If you are prompted to install an Active-X plug-in when connecting to the device, follow the prompts to accept the plug-in. Cisco MS200X Series 10/100 24-Port Ethernet Access Switches...
  • Page 9: Configuring Your Switch Using The Console Port

    Enter the switch IP address in the address bar and press Enter. For example, http://192.168.1.254. When the login page appears, enter the username and password. The default username is cisco. The default password is cisco. Usernames and passwords are both case sensitive. Click Login.
  • Page 10: Troubleshoot Your Connection

    • To reboot the switch, press the RESET button for less than ten seconds. • To restore the switch to its factory default settings, press-and-hold the RESET button for more than ten seconds. Cisco MS200X Series 10/100 24-Port Ethernet Access Switches...
  • Page 11: Where To Go From Here

    +86 4006282616 (Mobile phone) This is a class A product. In a domestic environment this ARNING product may cause radio interference in which case the user may be required to take adequate measures. Cisco MS200X Series 10/100 24-Port Ethernet Access Switches...
  • Page 12 Printed in China PRC 78-20644-01 1506-0MHL000...

This manual is also suitable for:

Ms200x-24pMs200x-24s

Table of Contents