D-Link DSN-500 Software User's Manual page 67

3. See section 4.2.2 to complete this procedure (including specifying the volume
composition, capacity, stripe width, drive, and chunk size) and record your settings in
Table C-1. The Ready to Create Volume screen shown in Figure 4-27 allows you to
confirm your selections for the reconfiguration.
4. Select Finish in the Ready to Create Volume screen to begin the reconfiguration process.
The Finish Reconfigure screen shown in Figure 4-28 appears.
xStack Storage Management Center Software User's Guide
Figure 4-26. Volume Composition Page
Figure 4-27. Ready to Reconfigure Volume Screen
57