Customizing The Date And Time Display - D-Link DSN-500 Software User's Manual

5. Click on the Apply button.

3.3 Customizing the Date and Time Display

The xStack Storage also maintains the current time zone. You may need to change these settings
the first time you configure the xStack Storage, if time changes occur in your area, or if you
transport the xStack Storage to another location. If you change these settings, restart the xStack
Storage for the new settings to take effect.
To customize the display of the date and time, perform the following procedure from any view.
1. On the Tools menu, click Customize Time Display. The Customize Time Display dialog box
appears (see Figure 3-12).
2. Select the appropriate time option. If you select Other, use the drop-down list to select the
appropriate time zone.
3. By default, time settings will be applied to all xStack Storage arrays being managed. To apply
the settings to just the current system, check the "Only change setting for..." checkbox.
4. Click OK.
5. Restart the xStack Storage for the new settings to take effect.
28 Chapter 3 Getting Started
Figure 3-12. Customize Time Display Dialog Box
The system date and time is reflected in the Remote System Time advanced
setting of the System Administration View (see Table 6-4).