Ungrouping Ports; Removing Ports From A Lag - D-Link DSN-500 Software User's Manual

This "V" Indicates That
the IP Address Selected
in the Main Display is
VLAN Enabled

7.5.2 Ungrouping Ports

If you want to ungroup the ports in a LAG:
1. In the Network Settings View of the Main Display, click a LAG.
2. Perform one of the following steps:
On the Network menu, click Ungroup Ports.
–
– In the Network Actions panel, click Ungroup Ports.
Press the right mouse button and click Ungroup Ports from the shortcut menu.
–
Any of these steps will ungroup the ports in the selected group.
3. Record your settings in Table C-3.

7.5.3 Removing Ports from a LAG

If you no longer need ports in a LAG, you can remove the ports from the LAG.
1. In the Network Settings View of the Main Display, click an Ethernet port that belongs to
a LAG.
xStack Storage Management Center Software User's Guide
Figure 7-10. IP Address that Belongs to a VLAN-Enabled Group
113