D-Link DSN-500 Software User's Manual page 141

A.7 Network Settings Menu (Ethernet Port Selected)
A.8 Network Settings Menu (Group Ethernet Port Selected)
A.9 Network Settings Menu (Group Selected)
A.10 Network Settings Menu (Portal Selected)
A.11 Help Menu
xStack Storage Management Center Software User's Guide
Create Portal – creates a portal (see section 7.4.1).
Replace Port with VLAN enabled Port – removes a port from an
Ethernet group (see section 7.6.1). If the port is VLAN-enabled, this
option changes to Replace VLAN enabled Port with standard Port
(see section 7.6.2).
Group Ports - groups individual ports (see section 7.5.1).
Create Portal – creates portals (see section 7.4.1).
Group Ports – add individual ports to the group (see section 7.5.1).
Remove Port from group – removes a port from a LAG (see section 7.5.3).
Create Portal – creates portals (see section 7.4.1).
Replace Group with VLAN enabled Group – replaces a group
with a VLAN-enabled group (see section 7.6.3). If the group is
VLAN-enabled, this option changes to Replace VLAN enabled
Group with standard Group (see section 7.6.4).
Ungroup Ports – ungroups ports in a group and returns them to
being individual ports (see section 7.5.2).
Add Ports to Group – adds ports to a group (see section 7.5.1).
Ping from Portal – issues an outbound ping from the network portal to a target (see
section 7.4.3).
Delete Portal – removes the portal from the network port (see section 7.4.2).
Help Contents – shows the online help table of content.
About – shows the version of the xStack Storage Management Center
software.
131