Shutting Down The Xstack Storage (Control Tab); Selecting A Battery Policy And System Failure Policy (System Policy Tab) - D-Link DSN-500 Software User's Manual

6.2.10 Shutting Down the xStack Storage (Control Tab)

The Control tab provides a Shutdown button for shutting down the xStack Storage.
To shut down the xStack Storage:
1. In the System Administration View, click the Control tab.
2. Click the Shutdown button.
The precautionary message in Figure 6-16 appears
3. Click OK to shut down the xStack Storage or click Cancel to not shut down the xStack
Storage.

6.2.11 Selecting a Battery Policy and System Failure Policy (System Policy Tab)

The xStack Storage Management Center lets you select the Battery and System Failure
policies that the xStack Storage will follow if its on-board battery fails or another system
failure occurs.
To select the Battery and System Failure policies:
1. In the System Administration View, click the System Policy tab.
The Battery and System Failure options in Figure 6-17 appear.
Figure 6-17. Systems Policy Tab (Battery and Controller System Failure Options)
3. Select the Battery Failure option that the xStack Storage should use if its on-board
battery fails (see Table 6-2).
4. If your system is equipped with redundant controllers, select the Controller System
Failure option that the storage system should use if one of the controllers fails (see
Table 6-3). This selection is not available for single-controller systems.
94 Chapter 6 System Administration
Figure 6-16. Precautionary Message