D-Link DSN-500 Software User's Manual page 62

3. If the top option is checked, all iSCSI initiators can access the selected volume. To
change this selection, uncheck this option and select one of the following:
Grant access to Initiator. Enter the name of an initiator that will have access to this
–
volume. To enable CHAP, check Require CHAP Logon Authentication, enter a CHAP
secret (12 to 16 characters) in the CHAP Secret field, and re-enter the same CHAP
secret in the Confirm CHAP Secret field (or you can enable CHAP later – see section
4.4.4). Click Apply.
Grant access to an iSCSI Initiator in this list. Select the iSCSI initiators to which you
–
want to grant access to this volume and click Apply.
– Revoke Access for an iSCSI Initiator in this list. Select the iSCSI initiators to which
you want to deny access this volume and click Apply.
4. Record your settings in Table C-2.
52 Chapter 4 Managing Volumes
If you revoke access, the iSCSI initiator moves below Unused Initiators if
Sort by Volume is selected in the Volume View. You can then use the
procedure in section 4.5 to remove unused iSCSI initiators if desired.