D-Link DSN-500 Software User's Manual page 37

3. Double-click on the current date and time value for the Remote System Time item, then type
the new date and/or time and press the Enter key. You can also click on the calendar button
at the far right of the date and time field to display a calendar pop-up to simplify the date
selection (an example is shown in Figure 3-11).
4. Alternatively, you can double-click on the NTP (Time Server) IP Address item and enter an IP
address for a third-party NTP server, or you can click on the "Synchronize Remote Time"
button to get the date and time from your local computer system.
xStack Storage Management Center Software User's Guide
Figure 3-10. Advanced Settings Tab
Figure 3-11. Calendar Pop-Up Dialog Box
27