LaCie Network Space MAX
User Manual
4.15.2. Modify RAID Mode
CAUTION :
Changing the RAID mode destroys all data stored on
the Network Space MAX. If you have saved data on the drives, back
up data before following these steps.
The Network Space MAX comes in RAID 0 mode. To modify the
RAID mode, click the
Change
mode and click Apply.
For information you can use to choose an appropriate RAID mode,
see the Dashboard and section
RAID creation times:
To create a RAID 0 array, it take about three minutes. To create a
RAID 1 array, the following chart shows the approximate time:
Total Size
1TB
2TB
• DESIGN BY NEIL POULTON
button. Then, choose which RAID
4.15.1. About RAID
Modes.
Approx. Time
2 hours
4 hours
Administering Your LaCie Network Space MAX
Fig. 85
Fig. 86
page 53