LaCie Network Space MAX User Manual page 56

LaCie Network Space MAX
User Manual
To install a disk:
Replacing a drive involves two main steps, installing the new drive
and initializing the new disk on the
below).
IMPORTANT INFO: It is strongly advised to replace a failed disk
with a new disk of equal capacity. If the new disk is smaller than the
one it's replacing, you will receive an error on the Dashboard. If it's
larger, the additional capacity will be unusable.
1. Turn off and unplug the LaCie hard disk MAX.
2. If you removed disk 2 (the top disk), carefully insert the replace-
ment drive into the top empty bay
1, first carefully insert the replacement drive into the bottom bay,
then replace disk 2 into the top bay.
3. In the Dashboard > RAID
and a button Claim will appear
rebuilding will begin (Fig.
• DESIGN BY NEIL POULTON
Dashboard > RAID page (see
(Fig. 91). If you removed disk
page, the new disk will be recognized
(Fig. 92). Click the button and
93).
Administering Your LaCie Network Space MAX
Fig. 91
Fig. 92
Fig. 93
page 56