Step 1: Connect The Power Supply - LaCie Network Space MAX User Manual

LaCie Network Space MAX
Connecting to a Network
• DESIGN BY NEIL POULTON
User Manual
page 11
2.1. STEP 1: Connect the Power
Supply
1. Connect the power supply to a wall outlet and to the LaCie
Network Space MAX (Fig. 04).
Now move on to step 2, section 2.2. STEP 2: Connect the Ethernet
Cable.
CAUTION: Only use the AC adapter supplied with your specific
LaCie device. Do not use a power supply from another LaCie device
or another manufacturer. Using any other power cable or power
supply may cause damage to the device and void your warranty.
Always remove the AC adapter before transporting your LaCie drive.
Failure to remove the adapter may result in damage to your drive
and will void your warranty.
You may use your LaCie drive when in a foreign country thanks to its
Fig. 04
100-240 Volt power supply. To be able to use this feature, you may
need to purchase an appropriate adapter or cord. LaCie accepts no
responsibility for any damage to the drive resulting from the use of
an inappropriate adapter. Using an adapter other than one autho-
rized by LaCie will void your warranty.