Dashboard: General Settings - LaCie Network Space MAX User Manual

LaCie Network Space MAX
User Manual

4.6. Dashboard: General Settings

This page allows the administrator to modify some of your Network
Space MAX's general parameters.
Machine Name: Modify the machine name. The machine name
identifies your Network Space MAX in LaCie Network Assistant and
on the local network. The machine name is limited to 15 characters.
Please use alphanumeric characters without spaces or symbols.
Date (mm/dd/yy): Change the date.
Workgroup: Modify the Windows workgroup name to set your Net-
work Space MAX to belong to a certain workgroup.
TECHNICAL NOTE: Mac users connected to a network with
Windows com puters can also access shares this way by selecting
in the Finder Network > [Workgroup] > NetworkSpaceMAX
"Work group" is the name of the Windows workgroup.
Time: Change the time.
FTP Service: Toggle this feature on/off to allow your Network Space
MAX to be accessible via File Transfer Protocol (FTP).
Time zone: Change the time zone.
Multimedia Service: This feature allows your Network Space MAX
to act as a UPnP multimedia server. Files (stored on OpenShare
only) will be available to play on UPnP-enabled players (such as
cell phones, computers, and game consoles). For information on
using your Network Space MAX to stream files to your UPnP devices,
see 3.7. Multimedia Server. For information on using the Network
Space MAX as an iTunes music server, see section
Server: iTunes. Note that if you've just added new content to the
Network Space MAX, it could take a few minutes before they are
available to UPnP/DLNA-certified players/adapters.
NTP Server: Click the box, then click the field to the right and type
the address of a Network Time Protocol server to provide the time
for the Network Space MAX automatically. While NTP is selected,
you can't modify the time and date settings.
• DESIGN BY NEIL POULTON
where
3.7.1. Multimedia
Administering Your LaCie Network Space MAX
Fig. 53
page 37