Creating The Raid Array And Setting Up Sharing; Start Up And Login; Create A Raid Protected Disk Array - LaCie 12big Rack Network Quick Install Manual

LaCie 12big rack network
Quick Install Guide
3. Creating a RAID Array
and Setting Up Sharing
3.1. Start up and log in
1. Connect a monitor, mouse, and keyboard to the
12big Network and boot the system.
2. Follow the steps in the Set Up Windows wizard, then
log on as an administrator.
Password: LaCie12big (case sensitive)
3. The Initial Configuration window will appear.
Click the Configure network button.
4. Verify that a local area connection with the heading
LaCie is established.
3.2. Create a RAID protected
disk array
1. Click on the Configure the raid for Data Drives link
and log on as administrator.
By default the credentials are:
Login: administrator
Password: 3ware
2. The 3ware 3DM2 administration page will open.
Click on Management and then Maintenance.
Note that the page may take several seconds to load.
3. Beneath the list of available drives:
a. Select the drives you wish to include, then click the
Create Unit button.
Installation
page 6