Table of Contents
Advertisement
Back Panel
The SSL VPN Concentrator back panel hardware is shown below and consists of the power On/
Off switch and the 110-240V power cord connection.
Figure 1-2
Note: Never substitute a power cord. Only use the power cord provided with the SSL
VPN Concentrator.
Steps for Deploying the SSL312
Three basic steps are involved in deploying the ProSafe SSL VPN Concentrator 25 in your
network:
•
Installing the SSL312: choosing a network topology, configuring its IP addressing scheme,
connecting the SSL312, and provisioning the SSL certificate. Refer to
the
SSL312".
•
Setting up SSL312 user accounts: creating individual user accounts, grouping users by
common access privileges, and defining those privileges. Refer to
Users"
and
Chapter 4, "Setting Up User and Group Access
•
Configuring remote access to corporate network resources through the SSL312: designing the
presentation Web portal that will display the available corporate resources to remotely
connected users. Refer to
Introduction
NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
Chapter 5, "Configuring the Remote Access Web
v2.1, November 2008
Chapter 2, "Installing
Chapter 3, "Authenticating
Policies".
Portal".
1-5
Advertisement
Table of Contents
