5. In the Inactivity Timeout field, enter the number of minutes of inactivity to allow for users in
the group.
You can set the inactivity timeout at the user, group and global level. Set the timeout as 0 in the
user and group configuration to use the global timeout setting. If multiple timeout settings are
configured, the user timeout setting will take precedence over the group timeout and the group
timeout will take precedence over the global timeout.
The maximum timeout setting is 2
on the Global Settings page disables the inactivity timeout (if 0 is also configured as the
inactivity timeout for the user and group).
6. Click Apply to save the configuration changes.
Setting Up User and Group Access Policies
NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
or over 100,000 minutes, although setting the timeout to 0
32
v2.1, November 2008
4-19