Network Configuration - HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server Quick Installation Manual

CD-ROM server is ready for use
6. Insert a disc into a drive and verify that the green
light on the server turns on. If it does not, verify your
SCSI cable connections and then power cycle the
CD-ROM server.

Network Configuration

If you are using the SMB protocol to communicate
with the CD-ROM server (e.g., Windows 95 or NT
networks), network configuration is not required.
Proceed directly to "Mounting or Mapping Network
Drives".
Novell NetWare 4.x Configuration
If the CD-ROM server is not on an NDS network (for
example, NetWare 3.x), network configuration is not
required.
As a NetWare 4.x NDS-compatible server, the HP
CD-ROM Server must be installed in the NDS tree,
which simply involves setting the appropriate
configuration parameters.
1. Use a Windows platform tool (such as Network
Neighborhood in Windows 95 or NT 4.0) to view the
directory structure. Locate the CD-ROM server's
configuration file, which is at
HP hhhhhh _NW\sys\config\config.ini,
are the last six digits of the LAN hardware address.
2. Open
config.ini
appropriate values in these parameters:
NDSTreeName
NDSServerContext
NDSAdminName
NDSAdminPassword
NDSInstall
3. Save the
CD-ROM server. The installation will take about 30
seconds.
4. After installation you must logout and then login
again. Then proceed to "Mounting or Mapping
Network Drives".
with a text editor and enter the
The name of the tree that you want to install
the server into.
The context in the NDS tree where you want
to install the server.
Distinguished name of a user or administrator
with Supervisor rights on the [Root] object,
and Create rights in the context where you
are installing the server.
The password of the administrator entered in
NDSAdminName shown above.
Change this to 'install' when you are
ready to install the server.
config.ini
.
file. This sends the values to the
CD
where
hhhhhh