Before You Begin - HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server Quick Installation Manual

Before You Begin

• Stand-Alone version only: Verify that the
CD-ROM Server power supply (19V DC) is
marked with the correct AC voltage and fre-
quency for your country.
• Verify that power is not connected to the
CD-ROM server or any of the CD-ROM drives.
The SCSI bus may be damaged if you connect or
disconnect any units when the power is on.
• Verify with your Network Administrator that a
network connection is set up to add and configure
the CD-ROM server onto the network.
• Record the LAN hardware (MAC) address of
the CD-ROM server. You will need this address
during installation. The address is printed on the
label normally placed on the bottom of the server,
in the form 00-60-B0-hh-hh-hh (where h is a hexa-
decimal number).
• Refer to the User's Guide if you need more detailed
information.
Typical Ethernet (10Base-T) Network with an
HP CD-ROM Server Stand-Alone Module
HP CD-ROM
Server
CD-ROM Drives
Network cables
SCSI
cables
Network Hub