Planning A Network Configuration; Network Access Methods - HP PROLIANT ML110 G5 User Manual

NOTE:
The direct attachment method requires a display, keyboard, and mouse.
Table 2 Network access methods
Access method
Direct attachment
Remote browser
Remote Desktop
Remote management
(Lights-Out 100 or
Integrated Lights-Out
2)
NOTE:
The ML110 G5 Storage Server does not include embedded Lights-Out 100 remote management support.
This server requires the purchase and installation of the Lights-Out 100c Remote Management Card in
order to use Lights-Out 100 remote management features. For more information about the Lights-Out 100c
Remote Management Card, see
http://h18004.www1.hp.com/products/servers/management/remotemgmt/lightsout100/index.html.

Planning a network configuration

You use the Rapid Startup Wizard to configure your storage server. This wizard is displayed
automatically when you first start your system. Before you run the Rapid Startup Wizard, it is helpful
to gather the network configuration information you need, including:
• User name and administrator password (the system provides you with defaults you need to change)
• E-mail addresses to set up system alerts
• SNMP settings
• Local area network (LAN) configuration settings
To help you gather this information, see
18 Installing and configuring the server
I.E. 5.5 or Storage server
later desktop
required? accessible?
No Yes
Yes No
No Yes
Yes Yes
"Configuring the server on the
HP ProLiant Rapid Notes
Startup Wizard access
Requires a monitor,
Directly from the storage
mouse, and
server desktop.
keyboard.
Directly from the HP Does not display the
ProLiant Storage Server storage server
Management console. desktop.
Windows Remote
Indirectly from the
Desktop capability
storage server desktop.
required on client.
See the HP ProLiant
Lights-Out 100
Remote
Management User
Indirectly from the
Guide or HP
storage server desktop.
Integrated
Lights-Out 2 User
Guide for server
access instructions.
network" on page 30.