Storage Server Startup; Deploying The Storage Server On The Network; Collecting Configuration Information - HP ProLiant ML110 G1 User Manual

2 Storage server startup

Before beginning the startup procedures, verify that the storage server is
completely installed, and that all cables and cords are connected. Also,
read the supplied documentation before starting. Documents include:
• HP ProLiant Storage Server installation instructions for your model
• HP ProLiant Storage Server administration guide
• HP ProLiant Storage Server release notes (if required, this document
will be available at http://www.hp.com/go/servers)
NOTE:
Known issues and workarounds for the storage server products and
the service release are addressed in release notes. To view the latest
version, visit http://www.hp.com/go/support. Select See support
and troubleshooting information and enter a product name/number.
Under self-help resources, select the manuals (guides, supplements,
addendums, etc) link.

Deploying the storage server on the network

The default shipping configuration contains one or two 10/100/1000
integrated network interface controller (NIC) ports for client data access.
NIC data ports also allow access to the WebUI that accompanies the
product. Most management and administrative procedures can be
accomplished via the WebUI.
IP networking and setup requirements are:
• Windows-based PC running Microsoft Internet Explorer 5.5 (or
later) on the same network segment as the storage server; this is
used to set up and administer the storage server.
• Additional Ethernet connection ports to client subnets (depending
on network options ordered).
Collecting configuration information
Choose a host name and collect general information required to initialize
the storage server for either dynamic host configuration protocols (DHCP)
HP ProLiant Storage Server user guide
21