HP J3278B - SureStore CD-ROM Server/Tower 7 NAS Server Quick Installation Manual page 8

Windows for Workgroups 3.11 (SMB Network)
1. Start File Manager.
2. Select Connect Network Drive... in the Disk menu.
The Connect Network Drive dialog is shown.
3. In the Path field, type the entry for your new CD-ROM
server, for example
the last six digits of the LAN hardware address.
4. Click OK. You are done.
OS/2 (SMB Network)
1. Open an OS/2 window.
2. At the OS/2 prompt, type:
net use <drive>: \\HP hhhhhh \cd
where
hhhhhh
hardware (MAC) address.
Example: (If LAN hardware address = 0060b0db000b)
net use E: \\HPdb000b\cd
UNIX (NFS on TCP/IP Network)
To mount the CD-ROM server on a UNIX system you will
need root privileges. Perform the following:
1. Create a directory for the CD-ROM server.
mkdir <directory>
2. Mount the CD-ROM server.
mount <IP address>:/ <directory>
where
<IP address>
to the CD-ROM server during TCP/IP configuration.
\\HP hhhhhh \CD
are the last six digits of the LAN
is the IP address that you assigned
Use default, or select
unused drive letter.
In 'Path', type:
\\HP hhhhhh \CD
Then click OK.
, where
hhhhhh
are