Safety Warnings And Cautions; Managing Nokia Ip290 Appliances - Nokia IP290 - Security Appliance Installation Manual

1
Overview

Safety Warnings and Cautions

Warning
To reduce the risk of fire, electric shock, and injury when you use telephone equipment,
follow basic safety precautions. Do not use the product near water.
Warning
Risk of explosion if battery is replaced by an incorrect type. Replace the battery only with the
same or equivalent type that the manufacturer recommends. Dispose of used batteries
according to the manufacturer's instructions.
Warning
To reduce the risk of fire, electric shock, and injury, disconnect the power cord and any
cables that connect to the appliance or gateway before you open the chassis and expose
internal components. Even though the power switch is turned off, power is still present inside
the appliance or gateway.
Caution
Do not place objects over the ventilation holes on the IP290 appliance. The
components might overheat and become damaged.
Caution
For IP290 appliances intended for shipment outside of the United States, the power
cord might not be included. If a power cord is not provided, use a power cord rated at
6A, 250V, maximum 15 feet long, made of HAR cordage and IEC fittings approved by
the country of end use.

Managing Nokia IP290 Appliances

You can manage Nokia IP290 appliances by using one of the following interfaces:
Nokia Network Voyager—an SSL-secured, Web-based element management interface to
Nokia IP security platforms. Network Voyager is preinstalled on the IP290 appliance and
enabled through the IPSO operating system. With Network Voyager, you can manage,
monitor, and configure the IP290 appliance from any authorized location within the network
by using a standard Web browser.
For information about how to access Network Voyager and the related reference materials,
see
The Nokia IPSO command-line interface (CLI)—an SSHv2-secured interface that
enables you to configure Nokia IP security platforms from the
20
"Using Nokia Network Voyager" on page 36.
Nokia IP290 Security Platform Installation Guide
line.
command