Table of Contents
Advertisement
M
F01: DUAL WATCH STOP
Function: Selects the Dual Watch resume mode.
Available Values: AUTO or HOLD
Default: AUTO
AUTO:
The Dual Watch feature will stop when a signal is received on the priority
channel. When the signal drops, the Dual Watch will resume.
HOLD:
The Dual Watch feature will stop when a signal is received on the priority
channel. It will not restart automatically.
F02: SCAN DIRECTION
Function: Select the scan start direction while initiating the scanner using the scan com-
mand by pressing the [ SCAN ] key.
Available Values: UP START or DOWN START
Default: UP START
F03: SCAN RESUME
Function: Selects the scan resume mode.
Available Values: BUSY, HOLD, TIME 1 sec, TIME 3 sec, or TIME 5 sec
Default: TIME 5 sec
BUSY:
The scanner will hold on a signal it encounters. When the signal drops, the
scanner will resume.
HOLD:
The scanner will hold on a signal it encounters. It will not restart automati-
cally.
TIME 1 sec: The scanner will hold on a signal it encounters, and scanner will resume after
one second.
TIME 3 sec: The scanner will hold on a signal it encounters, and scanner will resume after
three seconds.
TIME 5 sec: The scanner will hold on a signal it encounters, and scanner will resume after
five seconds.
F04: SCAN STOP BEEP
Function: Enables/Disables the scan stop beep.
Available Values: ON or OFF
Default: OFF
FTM-350 S
S
SCAN G
O
M
S M
O
39
Hide quick links:
Advertisement
Table of Contents
